ACCIDENTALLY PUT CLOVER EFI ON REAL MAC INSTALL
ACCIDENTALLY PUT CLOVER EFI ON REAL MAC UPDATE
ACCIDENTALLY PUT CLOVER EFI ON REAL MAC PATCH
ACCIDENTALLY PUT CLOVER EFI ON REAL MAC BLUETOOTH
ACCIDENTALLY PUT CLOVER EFI ON REAL MAC SERIES

Don't delete the Clover PKG file when the installation ends, you may need it later.

Customize, with only the following checked:.

ACCIDENTALLY PUT CLOVER EFI ON REAL MAC INSTALL

Change Install Location to the target drive (DO NOT FORGET THIS!!!!).

Install Clover to the target drive (Hackintosh Drive or USB Stick) using these options:.

You will be performing the following steps (optionally twice, if creating a USB boot stick as well): This partition is typically hidden from operating systems.ДЇirst, get the prerequisite Clover Bootloader (I am using r3949 at time of writing). This EFI directory lives on an ESP (EFI System Partition).

Use Disk Utility to erase and create a GPT drive.

Use a USB enclosure or drive dock to do this.

Attach your Hackintosh OS drive to a real Mac.

This is the file name required by the BIOS Updater.

Make sure the BIOS file is named GIGABYTE.bin as the previous link instructs.

Unzip and copy the BIOS file to the Fat32 partition.

Download the latest BIOS (F23, at time of writing).

ACCIDENTALLY PUT CLOVER EFI ON REAL MAC UPDATE

Fat32 is mandatory for the BIOS update process.

Use Disk Utility to erase the USB stick and create a GPT drive with a single Fat32 partition.

It will also optionally serve as a USB boot stick.

Insert a USB drive into your real Mac.

The USB boot stick is optional, but encouraged. Make tweaks to the EFI boot on your macOS drive, and if it fails to boot, fall back to the USB stick to boot. It is extremely recommended to have a backup bootable USB stick. Sometimes when tweaking things, the OS drive will fail to boot. This step is optional if you do not want a bootable USB stick and your BIOS is already up to date. See list of supported CPUs.ДЇull List of Hardware macOS Boot USB and BIOS Update Preparation (Optional) Have access to a CPU which works on F01.Make sure its flashed to F22+ (ask your reseller, like NewEgg).Motherboard on F01 (Retail Bios) - Will NOT boot a CPU newer than 5820K and you need a 5820K to flash the latest BIOS to boot any CPU other than this.

ACCIDENTALLY PUT CLOVER EFI ON REAL MAC PATCH

Other M.2 drives may need to patch SSDT-NVMe-Pcc.aml with the appropriate device path. Samsung M.2 drives should work as well, as I include an SSDT patch for them. I chose this card because this is the the best/easiest way to get AirDrop working. IOCPUNumber = (Number of CPU Cores * 2) - 1. Subtract 1 to get the max IOCPUNumber (zero indexed). Each CPU core has two hyper threading cores. If you get a different CPU, you MUST modify this line in your checkout with the correct IOCPUNumber value.See Motherboard and Graphics Card Notes below. This motherboard is a little wonky, so while other Gigabyte or Asus X99 motherboards may work, my EFI repository may not work with it.

ACCIDENTALLY PUT CLOVER EFI ON REAL MAC SERIES

Samsung 960 EVO Series - 1TB PCIe NVMe - M.2 Internal SSD.

ACCIDENTALLY PUT CLOVER EFI ON REAL MAC BLUETOOTH

BCM94360CD Wireless and Bluetooth Card.

4 x Corsair Vengeance LPX 32GB DDR4 3200.

Corsair RMx Series, RM750x, 750W, Fully Modular Power Supply.

Corsair Carbide Clear 400C Compact Mid-Tower Case.

Parts that can not be swapped easily will be noted. You need to have mostly the same hardware for this to work. A maxed out Mac Pro, for reference, is around ~$10,000, and is dated in comparison. Total Cost: ~$3500 ($500 more if using a PCIe flash drive). Eventually you will end up breaking something and not remember what you did.ДЄdditionally, someone using this repository can stay up to date with my changes by simply pulling down the latest files through Github on their boot partition. Not having your EFI in revision control is bad. This is the easiest way to make and track changes to improve support and manage OS updates (as needed). This EFI will only work with my specific setup, but may work with similar ones via tweaking. You don't want a macOS update accidentally breaking your system. Ideally, all your system compatibility changes are in this boot partition, away from macOS itself. Think of the EFI as the isolated magic boot image that will let you start macOS on unofficial hardware. This repository is the EFI directory (basically, a boot drive) that can boot a macOS (10.15.3, at time of writing) installation. This build served me well for 4 years, and rather than try to struggle through to rebuild a dated and not widely adopted X99 platform on hackintosh, I upgraded to a 10900k system. Clover is deprecated, and I was unsuccessful to get this updated to work with OpenCore and Big Sur.

Accidentally put clover efi on real mac